Description

50leds/lot 12mm WS2811 2811 IC Full Color LED Module Light Input 5V 12V IP68 Waterproof RGB Color Digital LED Pixel String

 

 

 

Description:

Great for decoration, advertising lights.
Working voltage:  DC12V / DC5V
Working current:  30ma
IP grade:              IP68
Dimension:          12mm
RED WIRE: DC12V / DC5V input
Green wire:DATA
White wire: Ground
input side: is the side without IC


 

Feature:

Full color Pixels are digitally-controllable lights you can set to any color, or animate
Each RGB LED and controller chip is molded into a ‘dot’ of silicone.
The dots are waterproof and rugged.
There are four flanges molded in so that you can ‘push’ them
into a 12mm drill hole in any material up to 1.5mm/0.06”” thick
They are typically used to make outdoor signs. Compared to our other 20mm LED dots
these are diffused 8mm LEDs so they are not as bright but they color mix a little nicer.
The pixels are connected by a 3-conductor cable. Red is +12V/5V, white is Ground, green is Data and
Data is shifted down from one pixel to the next so that you can easily
cut the strand or attach more onto the end.
Each dot is digitally controlled, with an internal 5-bit PWM LED driver (15-bit color for 32,768 different shades). The pixels must be clocked by a microcontroller
The pixels use 8mm diffused RGB LEDs
with brightness of about 300 mcd per individual r/g/b LED.
SD controller                                                                                                                            
Programable by Software
Individually Control
Conformal Coating,PVC glue protection
IP68, Water-proof protection
Easy installation (punching 12mm hole on metal panel)
50pcs per set


 

Applications:

Meets the general lighting
environment such as:
Outdoor advertising
christmas decoration


 

Packaged included:

50pieces/lot  pixel module 

​