Easy DIY Ambient Computer Desktop PC Screen Backlight RGB USB LED Strips Light 1M 2M 3M 4M 5M Full Kit


SKU: L00095 Category:


Brand Name: zofipo
Origin: CN(Origin)
Certification: CCC
Certification: ROHS
Certification: ce
Occasion: living room
Strip type: SMD
Average Life (hrs): 50000
Power Generation: Always On
Item Type: Strip
Waterproof: No
Power Consumption (W/m): 7.36W/m
LED Chip Brand: Epistar
Color Temp(K): RGB
Voltage: 5V
Power Source: DC
LED Chip Model: SMD5050
Model Number: backlighting
Specifications (light beads / m): 30/60
LEDs Number/M: 30/60 pcs/m

Important notice:

This backlight kit is only used for computers. Does not support TVs.
There is only one method for TV:
The video signal of the computer is output to TV, TV as monitor.
What software is needed?
Windows: Ambibox or Prismatik
Package Content:

1) LED controller box

2) Hight quality led strips

3) USB cable

4) Power adaptor 5V 110v mdash 240v withEU/US/UK/AU Plug.

Warm Prompt:
The led strip only work properly after installation on PC. If only few leds light up. It’s not quality problem! Please check the installation and setting. Please follow the Instruction to set up the strip kit.
Because the set up of this item is a bit complicated, if the product does not work properly, please be sure to contact us first instead of open dispute or write negative feedback directly, we must help you solve it, thank you!

Depending on the size of your PC monitor screen, you can choose the right kit.

PC setup tutorial:
Step 1:Install LED light on your PC. (please refer to the video for details)
Step 2:Setting up the Ambibox Capture Software.
2.1. Ambibox software(Shareware); Download link:

2.2. Run the Ambibox software, when installing, it recommends to use PlayClaw, I wouldn’t recommend to using it.
2.3. Select device and set this as ””Adalight””, under menu of ””Intelligent backlight display””, select the Port and the COM Port that your device has been detected. If select correctly, you can see Device Status: Connected, also down the bottom left it will say Adalight: connected.
2.4. Once you setted up, you can select the ””Wizard capture zones”” which will automatically generate all capture zones for you.

Note:The USB Port should be CH340(COM*),if not have ,please download the CH340 Driver:

Setup video tutorial:

PRO TIPS: if you find your colours are washing out or seem very white rather than colourful, adjust your gamma settings, if you getting a white backlight on a pure black screen, increase the size of sample zones, It will take a bit of fine tuning but worth it!

Test Effect Show on PC:

Additional information

Emitting Color

30leds per meter, 60leds per meter


1m kit, 2m kit, 3m kit, 4m kit, 5m kit


There are no reviews yet.

Be the first to review “Easy DIY Ambient Computer Desktop PC Screen Backlight RGB USB LED Strips Light 1M 2M 3M 4M 5M Full Kit”

Your email address will not be published.